1.4404–X2CrNiMo17-12-2–AISI/SAE316L1.4404或316L奧氏體不繡鋼AISI致使其鉻和鉬含水量高，碳含水量低，316型極具順暢的耐銹蝕性。這談談大直徑為，回火抗彎強度約為600MPa，只是這談談小受力，可能依據螺母化來延長。裝飾管有多樣通過率的庫存管理源于，各種有所差異的設備文件格式或工作狀態，使您夠最好的地做到您的開展供給。讓我們的服務培訓核心也就能夠私人訂制或割成一小片。數值命名：W、 產品編號1.4404–1.4401（316）–US S31603–316L標準的：ISO7153-1、ASTM F899、NF S94-090、NF EN 10088-3和-2、ASTM A479、ASTM A276、X2CrNiMo17-12-2–AFNOR Z3CND17-11-2–BS 316S31

MATERIAL SPECIFICATIONS:BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C(％): ≤0.030Si(％): ≤1.00Mn(％):≤2.00P(％)≤:0.045S(％)≤:0.030Cr(％): 16.5～18.5Ni(％): 10.0～13.0Mo(％):2.00～2.50Other(％): N≤0.11

MECHANICAL PROPERTIES( BAR/WIRE ROD ) AND INTERGRANULAR CORROSION RESISTANT TENDENCYVIASOLUTION TREATMENT

Thickness Diameter (d)/≤mm: 160Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): 40Elongation δ(transversal )≥(％): -Impact absorbing energy Akv≥/J|longitudinal: 100Impact absorbing energy Akv≥/J|transversal: -Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: YesThickness Diameter (d)/≤mm: 160<d≤250Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): -Elongation δ(transversal )≥(％): 30Impact absorbing energy Akv≥/J|longitudinal: -Impact absorbing energy Akv≥/J|transversal: 60Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: Yes一般不同的用途大部分app有機制、所有、油品、機械表、綠植基地食品類和醫治儀器設備業內的商品。本身建材可不可以中用大直勁或小受力的超表面淬火(熱處理回火)形態。